Tube Clamps

  branches   |  about   |  catalogues   |  history   |  ordering   |  technical   |  contact   |  links   |  online store    


PRODUCT SELECTOR:
Wrought Iron Components
Wire Mesh & Edging Sections
Tube Clamps & Tube
Expanded Metal
Perforated Metal
Flooring & Gratings
Handrailing
Steel Fencing Products
Perimeter Security
Roof Edge Protection
Gate Automation
Cantilever Gate Accessories
Sliding Door Hardware
Welding Products
Steel Sections
Channel Support
Steel Wire
Post Boxes
Paint and Sundries


Easy to use

Tube Clamp fittings are manufactured with simplicity and ease of use very much in mind. No special skills are required - no welding, no bending, no threading, just an Allen key to tighten the set screws and you can join tubing together in a matter of seconds. The comprehensive range of fittings and sizes means Tube Clamps can be used in a wide variety of applications, temporary or permanent.

Typical applications include the construction of:

  • Handrails
  • Market Stalls
  • Safety Barriers
  • Exhibition Stands
  • Awnings & Carports
  • Temporary Buildings
  • Support Structures
  • Lighting Grids
  • Children's Play Equipment
  • Pallet or Garment Racking

Easy to order

As with the fittings we've also made ordering simple. Each product illustration in this section carries a number - for example 101. Look under the type column and you will see that this fitting is available in five different sizes ABCDE.

Each of these letters refers to the size of the tube on which the fitting is to be used as indicated opposite. For example 191 is only available to suit size D tubing.

Galvanised plain-end tube is available from stock to match the tube clamp range

See our Visual Products Guide page for images of the complete product range with links to individual detail pages.

 

on to base flanges

back to tube clamps index

visit the Tube Clamps section on our
Online Store website for full range details

Five Standard Sizes
Tube Clamp and Tube sizes

A size to suit 26.9mm O.D. Tube
B
size to suit 33.7mm O.D. Tube
C
size to suit 42.4mm O.D. Tube
D
size to suit 48.3mm O.D. Tube
E
size to suit 60.3mm O.D. Tube

The standard finish is hot-dipped galvanised to BS EN ISO 1461
Tube Clamps can also be supplied, to order, polyester powder coated, in a range of colours.

© Copyright 2012 FH Brundle site design: Net-Coms     hosting: Consult-X