Paint and Sundries

  branches   |  about   |  catalogues   |  history   |  ordering   |  technical   |  contact   |  links   |  online store    


PRODUCT SELECTOR:
Wrought Iron Components
Wire Mesh & Edging Sections
Tube Clamps & Tube
Expanded Metal
Perforated Metal
Flooring & Gratings
Handrailing
Steel Fencing Products
Perimeter Security
Roof Edge Protection
Gate Automation
Cantilever Gate Accessories
Sliding Door Hardware
Welding Products
Steel Sections
Channel Support
Steel Wire
Post Boxes
Paint and Sundries


Nott's Captive Screw Fittings

CSF's (captive screw fittings) can be fitted to most packing cases, allowing them to be opened and closed quickly and easily, without damaging the case and needing only a screwdriver. The CSF is supplied in two parts - the Angle (fitted to the case) and the Top (fitted to the lid).

How do I choose which CSF to use?

The Angle - Light Weight Applications - Use Pattern 6
Medium Weight Applications - Use Pattern 11 or Pattern 12

The dimensions shown in the photographs below show whether the chosen pattern can be fitted on your case. All angles except Pattern 6 are provided with lugs for attaching a pilfer-evident seal between the Angle and Top.

The Top - Once you have decided which Angle to use, all you need to do is select the Top with a Captive Screw of the required length - depending on the thickness of the lid being fitted to the case.

Use the Table below to find the maximum lid thickness applicable to each Captive Screw. (Order Codes shown in blue)

 Captive Screw Lengths  CSF Type
 1 inch  1.25 inch  1.5 inch  2 inch  -
18mm
170077
 -  -  - Pattern 6
170076
14mm
17008
 - 26mm
17010
38mm
17011
Pattern 11
17007
18mm
17008
24mm
17009
30mm
17010
42mm
17011
Pattern 12
170012

 

Nott's Captive Screw Fittings

Nott's Captive Screw Fittings

CSF 6

Captive Screw Fitting Type CSF 6

 CSF 11

Captive Screw Fitting Type CSF 11

CSF 12 

Captive Screw Fitting Type CSF 12


How to order ?

As the CSF is sold in two parts, it is possible to order the Angles and Tops in different quantities. Established users often find this an advantage. When ordering please state whether you require Angles or Tops. Quote the Pattern and code number and, for Tops, the Captive Screw length of your choice.

For Example:
Pattern 11 Angles
Pattern 11 Tops 1" Screw

If you would like a Certificate of Conformity, please request this when ordering.

 

  back to paint & sundries index

packing case fittings

visit the Captive Screw Fittings
section on our Online Store
website for full range details

© Copyright 2012 FH Brundle  site design: Net-Coms     hosting: Consult-X